Heavy Duty Anchors

Mechanical anchor fasteners use friction to anchor themselves in place. The most common type of anchor is designed to expand in diameter when it is pushed into the hole. This expansion grips the base material tightly and causes the anchor to be firmly wedged in place.

A wedge anchor is a mechanical type expansion anchor that consists of four parts: the threaded anchor body, the expansion clip, a nut, and a washer. ... These anchors provide the highest and most consistent holding values of any mechanical type expansion anchor.

Stainless Steel UNS S30400 Square Bolts is often used in the brewing industry where it is used in pipelines, yeast pans, fermentation vats, storage and railway cars, etc. Stainless Steel 304H Hex Cap Screws has greater short term and long term creep strength than SS 304L at temperatures above 500 Degree C.

Chemical anchors are used to fasten threaded rod and rebar in high-load and critical fixings. They provide a more flexible adhesive to the fixture than their mechanical anchor counterparts. ... With chemical anchoring, an epoxy is injected into the hole prior to insertion of the stud.